Edmund Optics Technical Blog

Blog

A Laser Cutter Died 36 Hours Before a Trade Show. Here's How We Saved the Order

Posted on Wednesday 26th of August 2026 by Jane Smith

How a 45-207 Edmund Optics lens and a $220 chiller beat an $8,400 machine purchase. A laser cutter Canada case study about choosing the right professional laser engraving machine for acrylic. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Edmund Optics vs Generic Optics: Lessons From 500 Laser System Inspections

Posted on Tuesday 25th of August 2026 by Jane Smith

A quality inspector compares Edmund Optics components—including the rhomboid prism 15mm and 52775 iris diaphragm—against generic parts for laser engraving plastic, laser CNC cutting machines, and more. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Edmund Optics vs. Custom Optics: What a Quality Inspector Learned About CO2 Laser Components

Posted on Tuesday 25th of August 2026 by Jane Smith

A quality and compliance manager compares Edmund Optics aspheric lenses, rhomboid prisms, and CO2 laser systems against custom alternatives. Key lessons on spec verification, delivery certainty, and laser material compatibility. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

What Is Laser Etching? Choosing the Right Hobby Laser Cutter in Australia

Posted on Monday 24th of August 2026 by Jane Smith

What is laser etching, and which hobby laser cutter should you buy in Australia? This guide explains the difference between etching, engraving, and cutting, and why optics often matter more than raw wattage. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Which Engraving Laser Machine Should You Buy? Three Scenarios, Honest Answers

Posted on Monday 24th of August 2026 by Jane Smith

A practical buyer's guide to engraving laser machines: desktop diode lasers vs. production laser cutters, whether you can engrave glass with a diode laser, and what specs actually matter—written from real procurement experience. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

What Can a Laser Cutter Cut? A Cost Controller's Honest Breakdown

Posted on Friday 21st of August 2026 by Jane Smith

A procurement manager shares their laser etching system buying journey - from laser cutter paper tests to an Edmund Optics Tucson visit - and the real TCO lessons learned. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Can You Laser Engrave Canvas? Refurbished Stone Laser Engravers and the Edmund Optics 87-113 Lens

Posted on Friday 21st of August 2026 by Jane Smith

Can you laser engrave canvas? Yes, and refurbished stone laser engravers can be a smart TCO choice if you verify the optics and support. What a procurement manager learned from comparing new vs. refurbished, plus why the Edmund Optics 87-113 molded aspheric lens (18.4 mm focal length) is worth considering. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

The Most Powerful Diode Laser Won't Save You. Standard Optics Will.

Posted on Thursday 20th of August 2026 by Jane Smith

An emergency laser specialist explains why efficiency is the real competitive advantage, from the Edmund Optics neutral density filter 10% 975 nm to the 47-642, and why standard components beat custom optics on deadline-driven work. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Why Foam Board Laser Cutting Costs More Than It Should: A Procurement View

Posted on Thursday 20th of August 2026 by Jane Smith

A cost-control take on foam board laser cutting with an ytterbium fiber laser—and why components like the Edmund Optics 49-419 rhomboid prism and the Edmund Optics longpass filter 950nm belong in your total cost analysis. [...]

Continue reading →

Posted in Blog Leave a comment

Blog

Edmund Optics and Laser Machines: An Admin Buyer's FAQ (2025)

Posted on Wednesday 19th of August 2026 by Jane Smith

Practical answers to common questions about ordering from Edmund Optics, using edmund optics 47-276 equilateral prism, gravure laser machine capabilities, laser engraved brass, and laser cutting plexiglass. [...]

Continue reading →

Posted in Blog Leave a comment